Newly updated IoT Ready & Flexible Embedded Computer Solution from MPL
The new activity in IoT and Industry 4.0 requires reliable and flexible solutions to address the different needs in this new universal field. Most embedded computers and controllers are designed to meet a particular specification, but often there are needs for additional or different interfaces, more security, different connectors, or other requirements to meet this new environment.
|Flexible Embedded Computers from MPL|
With products from MPL, these challenging requirements can be addressed easily and cost efficient. All MPL products have a modular design and can be customized with standard modules, adjusted to the needs of the customer.
The newly updated PIP30 Family is designed to meet these requirements. The solution not only consists of an embedded computer in a housing, it also can be expanded with many options to meet those special application, using the same base board and BIOS.
Standard features of the Fanless & Rugged PIP30 are:
• Intel CPUs from Single Core to i7 Quad Core
• Power: 8 -36VDC, over-/reverse voltage and load dump protection, input signal
• I/Os: 4x Intel GigE ports on RJ45, or optionally up to 4x M12 or fiber optic, 4x USB 3.0, 5x USB 2.0, 2x RS232 and additional 2x RS232/422/485
The base board comes with 4GB soldered ECC DDR3 RAM and can be expanded up 16GB via SO-DIMM slot (depending on version). As mass storage, any on the market available solution can be integrated in the standard housing. The solution comes with two graphic ports as well as audio outputs and can be installed in various housing concepts like DIN-Rail, Flange, 19" Rack, and IP67.
The expansion options of the basic concept allows you to address precisely your needs based on a COTS offering. Some if the add-on options from stock are:
• Integrated UPS System, including an extended temperature version
• RAID Solution up to 4 slots (RAID1, 2, 5, 10)
• Additional RS232/422/484 Interfaces (isolated)
• Integration of up to 4 additional PoE+ or fiber LAN port
MPL also offers configurations as OEM version, or cost optimization with depopulation of the function not needed. Further, customization options are: foil and housing, load your image, lock the BIOS or set the BIOS according requirements, wire the interfaces according your needs, install your desired connectors, etc..
The PIP30 Family is the solution that will meet your needs today and tomorrow, and will be guaranteed available for the next 10 years. The product has been designed and tested for most severe standards like IEC60945, MIL-810F, EN50155. The solution already has been proven worldwide in applications like Maritime, Railways, Defense, and Industry.
About the Company
MPL AG was founded in 1985 by Rudolf Hug and is located in Switzerland. Since 1985, MPL has been developing and manufacturing embedded computers and systems for tough environments and for applications with highest reliability requirements. The success of the company is based on unique solutions: ruggedness, long-term availability, low power consumption, extended temperature range, and passive cooling concepts (fanless).